
Free
3D project
3D project

Found it cheaper?
Let's lower the price
Let's lower the price

Personal
manager
manager

7 years
warranty
warranty

Own
production
production

20 000
projects
projects
Video overview of cantilever racks
Cantilever racks is racking equipment ap-plicable for storage or warehousing of long, large-sized, non-standard loads locat-ed on horizontal cantilevers Cantilever structures are mostly used in warehouses, production facilities, metal warehouses, construction supermarkets and hardware stores.
In the photos you can see the double-sided and single-sided racking systems. Below are approximate prices for cantilever rack-ing systems. The final amount is subject to change both downwards and upwards. Everything depends on the customer’s needs (height, length, console load, product dimensions, etc.). Discounts are available for a bulk order and subsequent orders.
Important! We can make any cantilever rack according to your requirements. Both new and used cantilever equipment is available. The final price depends on the purchase volume. The more, the cheaper.
In the photos you can see the double-sided and single-sided racking systems. Below are approximate prices for cantilever rack-ing systems. The final amount is subject to change both downwards and upwards. Everything depends on the customer’s needs (height, length, console load, product dimensions, etc.). Discounts are available for a bulk order and subsequent orders.
Important! We can make any cantilever rack according to your requirements. Both new and used cantilever equipment is available. The final price depends on the purchase volume. The more, the cheaper.

The rack design

Single-Sided and Double-Sided Racking


Cantilever racks price: starting from $ 200 per 1 cantilever

Found a better deal?
Low price guarantee.If you find a cheaper price, we will beat it!
SINGLE-SIDED AND DOUBLE-SIDED RACKS
To begin with, let's look at what the cantile-ver racking consists of:
Flexible use of the system is achieved by the option of building additional ti-ers if more products need to be stored. Cantilever racks have high strength and durability and do not require maintenance. Each section is capable of carrying up to 30 tons of load.
- Base - is used to attach the racks to the floor.
- Upright - it is bolted to the base.
- Cantilever arm - it is hung to the up-right with the required pitch.
- End stopper - prevents the load from falling.
- Cross bracing - it is used to connect the uprights to each other.
Flexible use of the system is achieved by the option of building additional ti-ers if more products need to be stored. Cantilever racks have high strength and durability and do not require maintenance. Each section is capable of carrying up to 30 tons of load.
As low as 300 $
The price includes the cost of the upright, three canti-levers and the base
FEATURES OF WAREHOUSE CANTILEVER RACKING
The feature of cantilever racking is that all components are manufactured individually according to the required dimensions. The advantages of this system are: full accessibil-ity of all shelved materials and cargo and convenience of placement of a wide range of bulky goods such as rolled metal products, lumber, beams, plastic sections, rolls, pipes, logs, etc. Cantilever racks can be installed both indoors and outdoors.
Loads are placed on a minimum of two canti-levers, the load may project beyond the canti-levers for a maximum of 50% of the center distance of the uprights. The load must be positioned evenly along the length of the horizontal cantilever, strictly in the center of the cantilever and base, not protruding be-yond the horizontal cantilevers.
The cost of using one-sided and two-sided racks per unit of goods is low. For cantilever racks, special decking can be purchased if necessary. This makes it possible to modify them for use as a shelf storage system. Canti-lever type racks are serviced with a forklift.
Loads are placed on a minimum of two canti-levers, the load may project beyond the canti-levers for a maximum of 50% of the center distance of the uprights. The load must be positioned evenly along the length of the horizontal cantilever, strictly in the center of the cantilever and base, not protruding be-yond the horizontal cantilevers.
The cost of using one-sided and two-sided racks per unit of goods is low. For cantilever racks, special decking can be purchased if necessary. This makes it possible to modify them for use as a shelf storage system. Canti-lever type racks are serviced with a forklift.
As low as 300 $
The price includes the cost of the upright, three canti-levers and the base
Calculator
European level production
9000 м2
own production of metal structures
20 years
in the racking equipment market
20000+
completed projects in Russia and the CIS
7 years
warranty upon service agreement conclu-sion
1 day
delivery time (if the racks are in stock)
Invite for production

Cases of completed projects
Modern design department
Design engineers have modern software at their disposal and an experimental area where new designs of racking systems are tested.
Due to the fact that the racking design with the necessary configuration is developed from scratch, rather than according to existing templates, the customer receives unique equipment that most precisely meets their needs.
Submit